In daily life, when you use the automatic computer wire stripping machine, you may need to cut the wire. Today, Xiaobian will briefly analyze the reasons why the wire stripping machine cannot cut the wire accurately.

The main reasons for the inaccurate cutting of the wire stripping machine:
The crimping wheel slips; the crimping wheel is not pressed tightly; the screw of the synchronous wheel inside the stripping machine is loose; the timing belt inside the stripping machine is worn; the screw of the crimping wheel is loose and the screw is not tight; the screw connecting the motor and the synchronous wheel is loose; the motor driver error occured. In addition to these reasons, it may also be due to the performance of the wire stripper itself, such as the error caused by the set length being too long, or when the multi-segment stripping is performed, the spacing is too long, the wire adhesion is too large, the number of segments is too large, etc. Due to other reasons, the peeling length is unstable and the accuracy is not high.
In addition, in order to realize the middle stripping, the wire stripping machine itself needs to have the middle stripping function, so when choosing the wire stripping machine, it is necessary to make sure that the selected model has the middle stripping function. First through the function settings, adjust the mode to multi-segment stripping mode, and set the total cutting length, stripping head stripping tail data, middle stripping position and middle stripping length. Generally speaking, the middle stripping position refers to the length of the line head at the stripping place. Then press the wire harness to test the machine, and adjust the middle peeling data according to the actual peeling situation.