Home
ꄲ
Multi-function wire harness machine
ꄲ
Fully Automatic Wire Crimping and Water Seal Insertion Machine One Ended Mini Water Seals Insertion
Fully Automatic Wire Crimping and Water Seal Insertion Machine One Ended Mini Water Seals Insertion
This equipment is a cost-effective automatic crimping machine designed for single-head terminal crimping. It has the characteristics of simple structure and convenient operation. The drive part uses a stepping motor to replace the original cylinder drive, which makes the drive more flexible, the function is more diverse, and the accuracy can reach 0.01mm. The crimping part adopts 2T silent terminal machine,The mold part can use conventional OTP straight mold and horizontal mold.
| Model | WT-01A |
| Function | Wires cut, strip, single end terminal crimping , Water bolt insertion / seal insertion, twisted tinning |
| Detection device | Whetaher there is a terminal and wire, crimp inspection, air pressure detection, wire knot detection |
| Capacity | 2800 pcs/h or more per hour |
| Processing Range | AWG#30 - AWG#16, seal OD less than 17 mm single wire 1007 wire |
| Crimping ability | 2.0 Tons / 3Ton |
| Display method | Color LCD touch screen |
| Stripping length | 0 -10mm mm |
| power supply | 220V/60HZ |
| Cutting length | 45-3000 mm |
| Molds | OTP Side and rear |
| Air source | 0.4-0.6 mpa |
| Dimension | 1200*800*1600mm (excluding cable tray and conveyor belt) |
| Weight | About 230KG(excluding cable rack and conveyor belt) |
