Home
ꄲ
Multi-function wire harness machine
ꄲ
Fully Automatic Wire One Sided Water Bolt Insertion and Crimping Machine
Fully Automatic Wire One Sided Water Bolt Insertion and Crimping Machine
This equipment is a cost-effective automatic crimping machine designed for single-head terminal crimping. It has the characteristics of simple structure and convenient operation. The drive part uses a stepping motor to replace the original cylinder drive, which makes the drive more flexible, the function is more diverse, and the accuracy can reach 0.01mm.
| Model | WT-01 |
| Function | Wires cut, strip, single end terminal crimping , Water bolt insertion / seal insertion, twisted tinning |
| Detection device | Whetaher there is a terminal and wire, crimp inspection, air pressure detection, wire knot detection |
| Capacity | 2800 pcs/h or more per hour |
| Processing Range | AWG#30 - AWG#16, seal OD less than 17 mm single wire 1007 wire |
| Crimping ability | 2.0 Tons / 3Ton |
| Display method | Color LCD touch screen |
| Stripping length | 0 -10mm mm |
| power supply | 220V/60HZ |
| Cutting length | 45-3000 mm |
| Molds | OTP Side and rear |
| Air source | 0.4-0.6 mpa |
| Dimension | 1200*800*1600mm (excluding cable tray and conveyor belt) |
| Weight | About 230KG(excluding cable rack and conveyor belt) |
